TAM87229 MASKING FLUID

This special light green fluid can be used to mask off areas that tape would struggle on – including complex or curved shapes and difficult surface finishes.

• It can be applied directly from the bottle, and minimal dripping makes for a clean, precise job.
• Can be used with Tamiya Color paint products.
• Bottle weight: 20g.

Directions for Use
1. Wipe oil from target surface with detergent.
2. Apply directly from bottle and allow to dry completely.
3. Cut off of area to be painted and remove other unnecessary sections, then paint.
4. Remove masking fluid after topcoat has dried completely.

• Apply masking fluid after base coat has dried completely.
• Apply a thin layer. (It takes about 30 minutes to dry.) Thicker layers take time to dry.
• Use a new modeling knife blade when cutting off dried masking fluid. Hold down any edges of the dried fluid that have space beneath.
• This fluid is water-based. Apply over water-based paints with care.
• Fluid applied on complex surfaces may be difficult to remove.
• Handle bottle gently to avoid unintentional leakages.
• If nozzle is clogged, remove and clean it off.